Description:

Package Includes:

1x Full Size HVLP Spray Gun with 1.4mm Fluid Tip
1x 1000ml Aluminum Cup with Lid
1x Spanner Wrenches
1x quick coupler

1x Brush Cleaning Kit
1x Cup Filters
1x Instruction Manual (General for some models)

ST-300s LVLP Spray Tools :

 L.V.L.P Series Spray Gun is the newest one researched and developed by our researching team with great concentration. It is low volume low pressure, and economizes more energy source at the same time with the advantage of H.V.L.P. spray gun: excellence on environmental and paint saving. The best distribution of the inner pressure makes it get the perfect pulverization function. and it satisfy the various high requirements of professional paint.

Before you get started spraying, read the operating manual and review all safety precautions for your paint sprayer. Be sure to properly prepare the surfaces and protect anything you don’t want to spray.
Here are some spray techniques and pointers to get you started.

Practice First

If you are new to using a paint sprayer, practice first by spraying water before you paint. It typically takes some practice time to become comfortable with the spray techniques that produce the best quality finish. With a little practice you'll find your Graco sprayer easy-to-use and you'll be spraying like a pro in no time.

1.Using water, choose a practice area such as a garage door or other large flat surface.

2.Follow the start up procedures using water in your sprayer's manual.

3.Once the unit is primed with water to the gun, engage gun trigger safety and install spray tip and tip guard. See your user manual for details.

Selecting the Best Pressure Setting :

Set the spraying pressure using the pressure control knob to achieve a good quality full spray pattern. (See a good spray pattern example to the right). Notice that there are no runs in the pattern and the pattern itself is smooth. Before painting on the actual surface, use some scraps of cardboard or other area to test the quality of the spray pattern.

1. Start with a low-pressure setting and take a test pattern - trigger the gun quickly and if the spray pattern is full, you are ready.

2. In most cases the spray pattern will not be full on the first try - for example a gap exists at each end of the pattern or the edges appear heavier than the middle area of the spray pattern (see example of poor spray patterns ).

3. If the spray pattern is not full and solid you will need to increase the pressure setting slightly and test again. Continue this process of increasing the pressure setting until the desired pattern is achieved.
(Note when using paints or other coatings, proper spray tip selection is important. If the maximum pressure setting is reached and the spray pattern still is not suitable, you may have the incorrect tip size or the tip may be worn and has to be replaced – see spray tips or troubleshooting under Paint Sprayer Operation for more information.)